If you\’ve been scootering for a while you\’ll have noticed that your once supple fuel pipe of yesteryear has gradually turned to a solid unbendable tube, rather than the once pliable pipe it once was. That\’s all down to the way our fuel has changed over the decades. Losing lead then the gradual introduction of ethanol has been a killer for rubber seals, tank linings and fuel pipes.
This is the new ultra-high resistance petrol pipe from Casa Performance. Tired of using other petrol pipes that kept drying out and hardening in next to no time, the lads at Rimini Lambretta Centre decided to go and get their own made. With all the rubbish and additives contained within the pump petrol that we now have to endure, the material used for fuel line is of the utmost importance.
Once they had worked out the best material needed they had their own petrol piping made, which is perfect for use with all modern fuels. It remains supple even over really long periods of time and has a working temperature range from -70°C up to 130°C. Another feature of their pipe is that it is also designed to be used in tight angles where most similar pipes would kink or collapse, despite not having to revert to the use of integral wire spiralling. The inner diameter of this Casa Performance pipe remains constant, thus eliminating all possibility of fuel starvation.
What\’s it for?
This is perfect for any Lambretta S1, S2 , S3, GP/DL, Serveta, Vespa or motorcycle that uses a 7 mm internal diameter pipe.
Price and availability
The pipe is supplied in a single 100cm length section and the Casa Performance code is X159b. It costs Euro 8.95/GBP £8.20 per 1-metre section. It\’s available HERE directly from Rimini Lambretta centre or can be ordered from any Casa Performance dealer Worldwide.
Click the images below to visit our SLUK Shop…
If you’ve been scootering for a while you’ll have noticed that your once supple fuel pipe of yesteryear has gradually turned to a solid unbendable tube, rather than the once pliable pipe it once was. That’s all down to the way our fuel has changed over the decades. Losing lead then the gradual introduction of ethanol has been a killer for rubber seals, tank linings and fuel pipes.
This is the new ultra-high resistance petrol pipe from Casa Performance. Tired of using other petrol pipes that kept drying out and hardening in next to no time, the lads at Rimini Lambretta Centre decided to go and get their own made. With all the rubbish and additives contained within the pump petrol that we now have to endure, the material used for fuel line is of the utmost importance.
Once they had worked out the best material needed they had their own petrol piping made, which is perfect for use with all modern fuels. It remains supple even over really long periods of time and has a working temperature range from -70°C up to 130°C. Another feature of their pipe is that it is also designed to be used in tight angles where most similar pipes would kink or collapse, despite not having to revert to the use of integral wire spiralling. The inner diameter of this Casa Performance pipe remains constant, thus eliminating all possibility of fuel starvation.
What’s it for?
This is perfect for any Lambretta S1, S2 , S3, GP/DL, Serveta, Vespa or motorcycle that uses a 7 mm internal diameter pipe.
Price and availability
The pipe is supplied in a single 100cm length section and the Casa Performance code is X159b. It costs Euro 8.95/GBP £8.20 per 1-metre section. It’s available HERE directly from Rimini Lambretta centre or can be ordered from any Casa Performance dealer Worldwide.
Click the images below to visit our SLUK Shop…
good price for a metre, could use it on two or three set ups